P-100 Acryl Holzsiegel
Acryl Holzsiegel
About Product
Type of material
colourless, one-component polyurethane varnish, water-dilutable, gloss and silk-gloss
Properties
Non-odour, high abrasion strength,
high wear resistance, good hygrostability,
good cleansing durability
Acrylic Wood Sealer can be applied in living areas
.
How to Apply P-100 Acryl Holzsiegel?
Range of uses
for interior woodwork, e.g. wooden ceilings and panels, doors, shelves, furniture, parquet and wooden floors indoors with normal wear.
Technical Information
Shade : colourless
Degree of gloss : gloss and silk-gloss
Drying times (23 ° C 60 % rel. air humidity)
dust-dry : ca 30 minutes
re-coatable : 2 – 4 hours
through-dried : 12 hours
complete loadable : 3 days
First wet cleaning and laying of carpets : 5 days
Spreading rate : ca. 10 m²/ltr.
Application
The substrate must be portative, dry, clean and free of separating sub[1]stances (oil, grease, wax).
For priming, spraying and with roller, dilute with water. Do not use organic solvents! Depending on the substrate, apply by brush 1 – 2 times undiluted. brush (paint brush with synthetic bristles) spray or roller (foam roller). Work swiftly and thoroughly. Avoid crusts. Do not spread too thinly. For spraying and roller, dilute with 5 – 10 % water. Do not use organic solvents. Loading capacity: After coating wooden floors, one should allow at least 5 days for hardening before the floor is cleaned with dilute acid for scouring. Carpets should first be laid again after 5 days.
