Aqua Isoliergrund – Water Based Anti-Stain Insulation Primer
Aqua Isoliergrund
About Product
Fast-drying, sealing and isolating primer with very good adhesion for insulation of substrate impurities
Water dilutable, low odour, excellent stain isolation, exterior and interior, with good isolating and priming results on many critical substrates. Excellent adhesion also on difficult substrates. wax, tar, smoke, carbon black, grease and nicotine stains as well as for dried water spots.
.
How To Apply Aqua Isoliergrund ?
Range of uses
Isolating and priming coat for tropical woods, For priming of absorbent substrates such as wood, gypsum, wallpaper, styrofoam, concrete, asbestos cement and dispersion coatings
Technical Information
Shades : white and colourless
Degree of gloss : matt
Thinner : if necessary, with water
Drying Times (23 ° C 60 % rel. air humidity)
touch-dry : after ca. 30 minutes
dust-dry : after ca. 30 minutes
re-coatable : after ca. 90 minutes with dispersion paints, 2 – 3 hours with synthetic resin lacquers and dispersion lacquers
Spreading rate : ca. 10 – 12 m²/ltr
Application
The substrate must be portative, dry, clean and free of grease. In case of water spots or efflorescence, the spots have to be thoroughly brushed off. Stir well before use. The product is supplied ready for application. Apply in full cross-coats. Depending on the substrate, 1 to 2 coats are required. Test insulation by means of trial coating. During processing, the substrate resp. air temperature may not fall below 7°C. High air humidity delays the drying. After appropriate drying time, the primed surfaces can be over-painted with dispersion paints, acrylic resin paints and synthetic resin lacquers. A preliminary test should possibly be carried out. If applied outdoors, quickly rework. Do not mix other dispersions and dispersion lacquers.