HL-4 Solid Lasur – Sentetik ve Yağ Bazlı Vernikli Ahşap Koruyucu
HL-4 Solid Lasur
Type of material
Hiqh quality solvent-containing middle-layer glaze based on an innovative alkyd resin/oil combination.
Extremely high penetration due to the employment of special oils.
Optimal long-term protection due to high solids content.
Non-drip with good edge protection, easy to apply, free of biocides,
optimal protection against UV-rays
How to Apply HL-4 solid Lasur?
Range of uses
Prime and top coat for all wooden elements (wooden houses, pergolas,boardings, fences, windows and external doors)
Degree of gloss : silk-gloss
Viscosity : Light tiksotropik
dust-dry : 4- 6 hours
re-coatable : 12 hours
Spreading rate : 10 – 15 m² / L depending on the absorbency of the substrate
The substrate must be portative, dry, clean and free of separating substances (oil, grease, wax).
The wood moisture may reach a max. of 18 %, dimensionally stable wooden structures max 15%.
Intact old coatings are to be carefully sanded. Old coatings which do not adhere well are to be completely removed and then to be treated as rough wood. On dimensionally unstable wooden elements (e.g. wooden fences) 1-2 coats, on elements which are dimensionally stable or of limited stability 3 coats The colour score is influenced by various types of wood as well as through the layer thickness. The shades can be mixed together. A lightening can be effected with colourless. When applying on tropical woods, please observe the appropriate technical data sheet. As an exterior application, ash does not maintain a weatherproof coating. The prime coat should be applied with a flat brush; further coatings can also be sprayed and then reworked with a brush.