Acryl Feinspachtel

About Product

Type of material

Dispersion bouncing filler

Properties

Very fast-drying repair filler,

good build, rust-inhibiting, low pollutants,

High coverage.

Acrylic Fine Filler Rapid may be superimposed several times within a short period and is easy to sand.

How To Apply Acryl Feinspachtel?

Range of uses

Filling on primed wood (interior), plaster, concrete and primed iron (exterior and interior). As bouncing filler and spot filler for small surfaces.

Technical Information

Shade : White

Drying (23 ° C 60 % rel. air humidity)

1 – 2 hours depending on layer thickness. The values can fluctuate considerably in case of higher air humidity resp. lower temperatures

Application

The substrate must be portative, dry, clean and free of separating substances (oil, grease, wax). Apply a priming coat to porous and absorbent substrates beforehand. Rough wood indoors, depending on the absorbency of the sub[1]strate, to receive a priming coat of Acrylic Primer or Jansen Synthetic Resin Primer. A priming coat must definitely be applied to fibre boards. Iron receives an anti-rust coating. Old plaster surfaces require a suitable priming coat in every case. New plaster is still too damp and only after drying should it be coated with Acrylic Fine Filler Rapid. Intact old layers sand slightly, remove damaged layers. crylic Fine Filler Rapid can be applied several times in succession wet-on-wet.